More than double the 18 kg body in the same family. That mass absorbs interrupted cuts and also means the vise no longer moves by hand between machines: plan a hoist, and check the table load rating before assuming it can sit at the end of a small table.
FIG. / PRODUCT VISUAL / 6 VIEWSProduct images are shown for technical review; final compatibility is confirmed before quotation.
TBK-PLN-026329
GT150 / GT175 / GT200 modular vise, 38 kg
A family of modular machine vises in 20CrMnTi with jaws at HRC 58-62, jaw-face parallelism of 0.005 mm / 100 mm and squareness of 0.005 mm. The range covers QKG and GT100 at 18 kg, and GT150, GT175 and GT200 at 38 kg, all hand-driven for CNC machining centres.
- Weight38 kg
- Jaw hardnessHRC 58-62
- Body material20CrMnTi
- Parallelism0.005 mm / 100 mm
- Squareness0.005 mm
| Type | Bench vise |
|---|---|
| Drive | Manual |
| Weight | 38 kg |
| Jaw hardness | HRC 58-62 |
| Body material | 20CrMnTi |
| Parallelism | 0.005 mm / 100 mm |
| Squareness | 0.005 mm |
| Application | CNC machining centre |
| Size note in title | 8" clamping, parallel bench vice |
APPLICATION CHECKCNC milling and machining-center workholdingConfirm machine model, interface and drawing before order.
Request this part Ask about an alternativePRODUCT DETAILTECHNICAL INFORMATION
HOW TO READ THE NUMBERS38 kg Three sizes in one listing 0.005 mm / 100 mm
GT150, GT175 and GT200 are three jaw widths under one record with one 38 kg figure. The weight cannot be identical across all three, so confirm the size and its actual mass in the quotation rather than reading 38 kg as a per-size value.
The family accuracy, unchanged by size. Larger jaws make it harder to hold, not easier: the same 5 µm now spans a longer face, so temperature and clamping force matter more than on the 100 mm body.
WHERE IT DOES NOT FIT
Manual drive, machining-centre use. The larger opening means more overhang on the moving jaw, so heavy side loads belong on a fixture rather than on the vise alone. Hard jaws mark finished faces at this hardness.
WHAT THIS RECORD ANSWERS
Which sizes are covered?
GT150, GT175 and GT200 under one listing.
How heavy?
38 kg on the record, for the family rather than per size.
What accuracy?
Parallelism 0.005 mm / 100 mm, squareness 0.005 mm.
SPECIFICATION INPUT
Exact fit starts with the machine.
Specifications are listed with the part. Confirm machine model, interface, material and drawing before quotation.
INPUT / 2D + 3D DRAWINGCHECK / INTERFACE + MATERIALOUTPUT / QUOTATION ROUTE