TEBAK TB-Q5 2023 Easy Operating Hand Circular Saw Blade Sharpener/ Valve Grinding Machine

TB-Q5 2023 Easy Operating Hand Circular Saw Blade Sharpener/ Valve Grinding Machine is supplied as a CNC machine-part and precision accessory components item in the CNC Machine range and is identified for Tool-room and production sharpening of cutting tools. This section expands the available technical information. It supports technical review and part selection; it does not replace a drawing, a machine manual or an application check by a qualified engineer. The product title and the captured attributes remain the primary identification signals, and no performance figure, certification or tolerance class is stated here unless it is present in the captured record.

Product overview. The role of this component is to support a defined machine, tooling, positioning, maintenance or production task when the component is matched to the correct interface and operating conditions. In service it works as one part of a larger machine system, so correct performance depends on the relationship between the part, the mating component, the available installation space and the process conditions. Typical applications include CNC machine maintenance, machining support, automation equipment, fixture preparation, service replacement and production-line improvement work. Where the component is used on a moving axis or in a fixture, confirm that the full working envelope is unobstructed and that adjacent parts, guards, cables and tools cannot interfere through the complete travel or clamping range.

Captured parameters and specifications. The record contains the following fields: type: Universal; voltage: 220/380V; cnc or not: Normal; core components: Motor; key selling points: Easy to Operate; machinery test report: Provided; video outgoing-inspection: Provided; power (kw): 0.55; weight (kg): 110; dimension(l*w*h): 65*65*110cm; Key words: Saw blade sharpener; Advantage: Recyling Using of Saw Blade; Standard grinding wheel: White corundum wheel; Saw blade diameter: (25) 50-300 (350mm); Usage: Grinding saw blade; Max. Grinding Length: 350mm; Power(W): 550W; Max. Grinding Diameter: 350mm; Surface Roughness(μm): 0 μm; Certification: CE ISO; Selling Units: Single item; Single package size: 65X105X65 cm; Single gross weight: 90.0 kg. The captured material field is Confirm against the selected model. These values are the specifications currently visible in the captured product data. Where a field is absent, the absence is an open technical item rather than permission to assume a standard value. Confirm the exact model, revision, critical dimensions, tolerance, surface condition, quantity of matched parts and any required accessories before approval.

Model variants in this family. Comparable items in this family are separated by size and functional dimensions, the interface or mounting arrangement they accept, material grade and treatment, tolerance or accuracy class, surface finish and the accessories supplied with the item.

Selection and compatibility review. The most important checks for this item are dimensions, interface, mounting pattern, material, operating environment and machine or drawing compatibility. Compare each point with the existing assembly rather than against a similar-looking image, and confirm whether the listed model is a complete assembly, a single replacement component, a set, or an accessory. Where the application involves coolant, chips, dust, vibration, heat or frequent changeovers, include that information in the technical request because it can change the suitable configuration.

Receiving inspection. Inspect the part for transit damage, corrosion, burrs, cracks and contamination. Confirm that the model or identification marking matches the order, measure the critical dimensions where a gauge is available, and verify that the quantity, fasteners and any supplied accessories are complete. Keep the protective packaging in place until the part is ready to be installed and record any transit damage before signing for the delivery.

Installation and service considerations. Clean and inspect mating surfaces before installation. Remove damaged fasteners, burrs and contamination that could alter alignment, and follow the machine maker sequence for tightening, adjustment, lubrication and run-in. After installation, check smooth movement, reference position, clamping or cutting stability, abnormal noise, backlash and contact marks. For an electrical or sensing item, isolate power and verify the connector and signal before energizing. These steps are general service guidance; the machine manual and a qualified technician remain the authority for the final procedure.

Fault diagnosis. If the part does not fit or does not perform as expected after installation, check the mating dimensions, the interface, the mounting orientation and the presence of debris or burrs before changing the part again. Confirm that the machine parameters and surrounding components have not changed. Record the observed symptom together with any error code, noise, temperature reading or dimensional drift before removing the part, because that information shows which characteristic of the component actually matters in this installation.

Maintenance and wear monitoring. Follow the machine maker schedule for inspection, cleaning, lubrication and replacement. Watch for changes in clearance, noise, temperature, finish or repeatability because those signals normally appear before a visible failure. Replacement should follow the original installation, alignment and adjustment sequence rather than being treated as a simple part swap.

Documentation and traceability. Keep the product ID, machine model, installation position, installation date, measured critical dimensions and any drawing revision together with this part record. Where the item is matched to a specific axis, station or fixture, record that reference as well, because a later replacement ordered from a photograph alone can be mistaken for a similar variant. If the part is replaced as part of a repair, note the reason for replacement and any adjustment made during fitting so a repeat problem can be distinguished from normal wear.

What to confirm in an inquiry. Include the product ID TBK-CM-60741952257, the required quantity, machine brand and model, interface or mounting information, a drawing or clear photographs, the workpiece or application material, the operating environment and the dimensions that matter most. Ask for a current technical drawing, available variants, confirmed material, complete contents, inspection information and compatibility notes before treating the item as a final match.